Precautions for daily inspection of eaton bussmann melt
  Eaton bussmann is currently one of the most famous and sold fuse in the world. Its product quality, service and utilization rate are all unanimously praised by customers. Main: high and low voltage fuses, Xi'an fuses, electrical equipment, electronic products, industrial circuit facilities, used for overcurrent use of protection circuits such as transformers, transformers, motors, etc., we generally should pay attention to the following when selecting fuses:

1. Rated current of melting tube
The rated current of the melt tube should be equal to or greater than the rated current of the melt

2. The rated current of the melt
The rated current of the melt should be greater than the larger load current, and its reliability factor is generally 1.1 to 2.0, depending on the specific situation, and consider the operability of the action of the upper and lower fuse in the same electrical circuit. It should be pointed out. The fuses used to protect voltage transformers do not need to specifically consider the rated current, because the rated current of the high-voltage fuses used for voltage transformers is always smaller, for example, the fuse melt rated current of the high-voltage side of the 6 ~ 35kV voltage transformer is generally Both are 0.5A.

3. Check the breaking capacity of the fuse
For the fuse without current limiting function, the effective value of the inrush current of the short-circuit current is selected for verification, while the current-limiting fuse is verified by the short-circuit current sub-transient current.
  Eaton bussmann high-voltage fuses have a lot of demand in the market, but now the market is fiercely competitive, and the quality of purchase is particularly important. The products provided by Shenzhen Anming are not only of good quality, but also have a service attitude that is worthy of praise. NO.1.